DTF Pressing Instructions
Premium transfers from Under Pressure Transfers
For best results, follow these simple pressing steps carefully.
290ยฐF
Press Temperature
8 sec
First Press
Hot Peel
Peel Immediately
5 sec
Second Press
Step-by-Step Instructions
- Pre-press the garment for 3โ5 seconds to remove moisture and wrinkles.
- Position the DTF transfer on the garment with the printed design facing up.
- Press at 290ยฐF using medium to firm pressure for 8 seconds.
- Peel immediately while hot. Do not wait for the transfer to cool.
- Cover the design with parchment paper, kraft paper, or a finishing sheet.
- Press again for 5 seconds to improve durability, wash resistance, and finish.
Important Notes
- Every heat press is slightly different. Always test before full production.
- Use medium to firm pressure for best adhesion.
- Avoid stretching the garment immediately after pressing.(I can't stress this enough! Give the garment 24 hours to cure before stretching)
- For sensitive fabrics, reduce temperature slightly and test first.
Under Pressure Transfers
Premium wholesale DTF transfers printed in Waterloo, Ontario.
Order DTF Transfers